User's Manual

Navigating Menus
23 DigiTrak
®
F5 User Guide
Calibration Menu
The calibration menu shows two calibration options, 1 Pt
Calibration (one point calibration) and 2 Pt Calibration (two
point calibration).
When the calibration option has been selected in the main
menu, the following screen will appear.
Receiver Calibration Menu
To select the 1 Point Calibration option from this screen, click
the trigger. See “Calibrating the Receiver to the Transmitter”
and “1 Pt Calibration” below for more information.
To select the 2 Point Calibration option, toggle right to
highlight the 2 Pt Calibration option and click the trigger. See
“Calibrating the Receiver to the Transmitter” and “2 Pt
Calibration” below for more information.
To cancel the calibration, toggle right until the Exit option is
highlighted then click the trigger. You will be returned to the
main menu with no change to the calibration.
Exit
(Cancels
Calibration)
1 Point
Calibration
(Shown
Highlighted)
2 Point
Calibration