User's Manual

Getting Started
15 DigiTrak
®
F5 User Guide
Transmitters
DCI manufactures several different styles of transmitters for
use with the F5 system. The most common style, FX, is
shown below and is available in a range of transmitting
frequencies.
Long-Range FX Transmitter
The FX transmitter is 15” (38.1 cm) long and 1.25 in. (3.175
cm) in diameter and must fit snugly in the housing. It may be
necessary to wrap the transmitter with tape or O-rings to
prevent it from rattling in the housing.
The index slot in the front end of the transmitter fits onto the
anti-roll pin (key) in the housing for proper alignment of the
transmitter in the housing.
The Extended-Long Range, FXL, is the second most popular
transmitter style in the F-Series transmitter line and is the
same as FX shown above but is 19” (48.3 cm) long with an
extended transmitting range.
For an up to date list of all of the transmitter styles available
for use with the F5 system including transmitting frequencies,
ranges, battery and housing requirements see the DigiTrak F-
Series Transmitter Models specification sheets included with
your system and available on DCI’s website,
www.digitrak.com.
Transmitter Serial Number
Regional Designation Number
(Must Match that of Receiver)
Battery Cap End
Front End Cap with
Temp Dot and Index Slot