User's Manual

Getting Started
13 DigiTrak
®
F5 User Guide
5. If all items of the self-test pass, the startup screen will
display as shown below.
F5 Start Up Screen
If an item of the self test fails, the failure will show in place of
the Model Name and a warning symbol will appear in place of
the Regional Designation Number. Contact DCI at one of the
phone numbers shown on the start up screen for support.
6. Click the trigger to open the Main Menu. See the
Navigating Menus section for more information.
Automatic Shutdown
The F5 receiver will shut down if no trigger action and no
transmitter signal are detected for 15 minutes.
Toggle & Trigger Switches
The F5 receiver has two types of switches for operating the
system – a toggle (thumb switch) located on the top of the
unit and a trigger located under the handle.
Toggle Switch – Used to access and navigate menus. It
moves in four directions – left, right, up and down. Each
movement of the switch has a corresponding action on the
display. See the Navigating Menus section.
Regional
Designation
Number (Must
Match that of
Transmitter)
Model Name
Serial Number
Software
Version
Web Address
Customer
Service Phone
Numbers