User's Manual

DIGITAL CONTROL INCORPORATED
42 DigiTrak F5 Operator’s Manual
and you will find that your receiver’s projected depth reading at the locate line should display
as 25 ft 5 in. (7.75 m).
Using the projected depth displayed on your receiver, you can calculate the actual depth of
the transmitter using the second row of conversion factors. Select the corresponding
conversion factor associated with your pitch value, then multiply that value by the projected
depth. For example, if your pitch is 30% and your projected depth reading is 24 ft (7.32 m),
then you would multiply 0.943 by 24 to determine that the actual depth of the transmitter is
22.63 ft or 22 ft 8 in. (6.90 m).