User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual 25
14. A line between the RLP and FLP represents the transmitter’s heading. The
transmitter is located beneath where this line and the LL cross.
15. Position the receiver at the intersection of these lines with the LL passing through the
center of the box on the display and hold the trigger to take a depth reading.
Receiver Depth Mode Screen (at LL)
Actual Position of Receiver
and Transmitter
To verify the depth reading, disable the HAG, set the unit on the ground, and take
another depth reading. This reading should be within 5% of the depth reading obtained
with the HAG on and the receiver lifted. See Appendix B on page 37 and Appendix C
on page 43 for more information on depth.
With LL
aligned
in box,
receiver
may face
toward
RLP or
FLP
during
depth
readings