User's Manual

DIGITAL CONTROL INCORPORATED
24 DigiTrak F5 Operator’s Manual
Finding the RLP to Confirm Transmitter Heading and Position
Finding the RLP will allow you to confirm the transmitter’s heading and position. Like the FLP,
the RLP is represented as a target ( ) on the receiver display.
Continue the locating procedure as follows:
11. From the LL, facing toward the drill or last transmitter location, walk forward while
keeping the target aligned on the vertical crosshairs.
Receiver Locate Mode Screen
(Approaching RLP from LL)
Actual Position of Receiver
and Transmitter
12. Position the receiver so the locating target is centered in the box.
Receiver Locate Mode Screen (at RLP)
Actual Position of Receiver
and Transmitter
13. Mark the ground directly below the receiver’s display screen as the RLP.