User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual 23
Receiver Locate Mode Screen (Approaching LL)
Actual Position of Receiver
and Transmitter
Do not rely on the alignment of the ball with the vertical crosshair to identify the
left/right position of the transmitter. Accurately locating the front and rear locate
points is required to determine the transmitter’s lateral position (heading) and take
accurate depth readings.
9. Position the receiver so the LL aligns with the horizontal crosshair.
Receiver Locate Mode Screen (at the LL)
Actual Position of Receiver
and Transmitter
10. Mark the ground directly below the receiver’s display screen as the LL. You could
take a depth reading here by holding in the trigger, but to be certain you are directly
above the transmitter and your depth reading is accurate, first find the RLP.
Line-in-
the-box
Locate line (red
when not
aligned in box
for depth
reading)
Yaw (left/right
rotation of
transmitter
relative to
receiver)