User's Manual

DIGITAL CONTROL INCORPORATED
14 DigiTrak F5 Operator’s Manual
2. From the receiver main menu, select the HAG menu option. You will see the HAG
menu with the enable option highlighted for selection and the current or default (12 in.
or 0.30 m) HAG setting shown in the description line at the bottom of the screen. If the
HAG had previously been enabled, the disable option would show automatically
highlighted for selection.
HAG Menu Screen
3. Click the trigger to enable the HAG at the value shown at the bottom of the screen.
The confirmation signal will sound as the screen returns to the main menu. Depth
readings must be taken with the receiver held at this height.
If you want to change the HAG value, select the Enable HAG option to open the
keypad and set a new HAG value.
Set and enable
HAG
Disable HAG
Enable HAG
(shown highlighted)
Description of
highlighted selection
with current HAG setting
in inches or meters
Exit