User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual 13
If the receiver does not detect a roll signal from the transmitter, the roll offset
operation fails:
Roll Offset Failure Screen
Click the trigger to retry setting the roll offset or toggle right to select exit and return to
the settings menu. If the roll offset failure screen appears, verify the setup and try
again or contact DCI Customer Service.
Disable Roll Offset
To turn off the roll offset function, select the disable roll offset option from the roll offset menu.
The confirmation signal will sound as the screen returns to the settings menu. The value that
displays for roll on the Locate Mode screen will be that of the transmitter.
Set Height-Above-Ground (HAG) Distance
The height-above-ground (HAG) function allows you to program a height measure-
ment into the receiver so that you do not have to set the receiver on the ground for
a depth reading. Raising the receiver above the ground provides separation from
underground interference, which can reduce the transmitter’s range or cause
variable readings.
1. Before accessing the HAG menu to turn on or set the HAG, you should measure your
desired HAG distance. To do so, hold the receiver comfortably at your side and
measure the distance from the bottom of the receiver to the ground. The available
values range from 12–100 in. when English units are used, or 0.30–2.54 m when metric
units are used.