User's Manual

DIGITAL CONTROL INCORPORATED
liv DigiTrak F5 Operator’s Manual
Battery Charger
F Series Battery Charger System
General Description
The DigiTrak F Series Battery Charger (FBC) system includes AC and DC power cords, an
AC adapter, and three rechargeable F Series battery packs. The battery packs power both
the F5 receiver and the FSD remote. The FBC battery charger can operate from AC (100–
240 V, 50–60 Hz, 1.5 A max.) or DC (10–28 V, 5 A max.) power sources. The AC power cord
provided with your system is standard to your global area of operation.
A fully charged F Series lithium-ion battery
pack (FBP) will power an F5 receiver for
approximately 10 hours or an FSD remote for
approximately 14 hours before recharging is
necessary. A battery pack can be recharged
about 400 times before the battery life is
substantially reduced.
Checking Battery Status
To check the charge status of a battery pack,
press the battery status button below the five
LEDs. The LEDs indicate the charge level, with
each representing 20% of the charge.
The battery charge status can be checked at
any time, even when the battery is installed in
a unit.
F Series Battery Pack
T
a
b
LEDs indicate
charge level
(shown 80% full)
Battery status
button
AC adapter
AC power cord
F Series battery
charger
F Series
battery packs
DC power cord