User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual liii
Predicted Depth Screen
The predicted depth screen appears when the receiver is positioned at the front or rear locate
point (FLP or RLP) and the trigger is held in. However, the predicted depth is only valid at the
FLP. The predicted depth display will show arrows pointing to the receiver and the predicted
depth point ahead of the transmitter. For more information about predicted depth, see
Locating on page 15.
FSD Predicted Depth Display with HAG On
As on the depth display, when a roll offset is set at the receiver, the letters RO will display at
the bottom right of the clock circle on the FSD predicted depth display. The example shown
above does not have the RO, which indicates that a roll offset has not been set.
When the transmitter pitch information cannot be obtained at the receiver due to range
restrictions or interference, the remote will assume the transmitter has a pitch of zero for
depth and predicted depth readings. In this case, the remote will show the transmitter pitch
as .
Horizontal distance
between transmitter
and FLP
Predicted depth