User's Manual

DIGITAL CONTROL INCORPORATED
lii DigiTrak F5 Operator’s Manual
When the receiver is positioned at the LL with the trigger held in, the FSD display will change
to show the depth reading, with arrows pointing to the ground and drill head. When the
height-above-ground function (HAG) is turned on, the receiver icon is shown elevated above
the ground with the HAG setting displayed. The following figure shows the HAG setting at
2' 03", indicating the receiver is being held that distance above the ground. For more
information on the HAG settings, see Set Height-Above-Ground (HAG) Distance on page 13.
FSD Depth Display at Locate Line with HAG On
The depth will display for 10 seconds after the trigger on the receiver is released, and then
the display will return to the main display screen.
When a roll offset is set at the receiver, the letters RO will display at the bottom right of the
transmitter roll indicator on the depth display and on the predicted depth display. For more
information, see Roll Offset Menu on page xix and Set Roll Offset on page 11.
HAG setting
Depth reading
Roll offset indicator
appears here if it has
been enabled on the
receiver