User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual xlix
Settings
Settings lets you change the settings shown below:
FSD Settings Menu
Changes made to these settings won’t be saved until the FSD remote is turned off. DCI
recommends that you set the FSD remote settings to match those on your receiver.
Telemetry Channel Lets you select between telemetry channel options 1,
2, 3, and 4. The remote and the receiver must be set to the same
channel and must have the same telemetry frequency designation.
Receiver Model Lets you set the FSD unit to work with different
DigiTrak receivers. Operator’s manuals for other receivers are
available on Digital Control’s website at www.digitrak.com.
Telemetry Frequency
Designation Opens the telemetry region options. If you must change this
setting, call DCI to determine which setting is required in your area
and to verify that it matches the receiver’s telemetry frequency
designation.
Depth Units Lets you set depth units as either English (Fahrenheit, psi, and
lbs.) or metric (Celsius, kPa, and kN).
Telemetry channel
(shown highlighted)
Depth units
Receiver model
Exit
Telemetry frequency
designation
Description of
highlighted option
Pitch units