User's Manual

DIGITAL CONTROL INCORPORATED
xlviii DigiTrak F5 Operator’s Manual
Main Menu
Access the main menu by pushing the down arrow button. The Remote Mode option is
automatically highlighted.
FSD Main Menu Screen
Use the arrow buttons to highlight an option, then press the execute button to select it. The
options available on the main menu are described below and in the following sections.
Cable Mode enables use of the FC cable or SST transmitter. This option is not available
unless you have contacted DCI to have it activated for use with a cable transmitter.
Information displays FSD system information such as the software version, serial number,
telemetry configuration, and current settings.
Remote Mode
Remote Mode opens the FSD main display screen, which is the default screen
displayed on startup. It shows the transmitter pitch, roll, battery status, depth,
predicted depth, and temperature. The main screen also shows the FSD battery
status, receiver type, telemetry channel, telemetry update meter, and Target Steering data (if
active). To exit this screen at any time, press the down arrow button to return to the main
menu.
For detailed information about the FSD main display screen and the FSD depth display
screens, see Display Screens on page li.
Power Off
Select Power Off, then hold the execute button until the FSD remote turns off.
Remote Mode
(shown highlighted)
Adjust Contrast
Power Off
Information
Settings
Description of
highlighted option
Cable Mode