User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual xlvii
Caution Adjusting the up/down orientation of the display without
loosening the knobs can damage the unit.
Loosen Display Knobs
Adjust Viewing Angle
Tighten Display Knobs
Left/Right When the FSD
remote’s magnetic
base is secure, you
can adjust the left-right
viewing angle by
rotating the display
about the base.
Center With the magnetic
base secure, take hold
of the display and
rotate it to the desired
orientation.
Attaching / Removing Visor
The removable visor on the FSD
remote shields the screen from
environmental conditions such as rain
and sun. The visor is held in place by a
ridge on the top and channels on the
sides of the display.
To install the visor, slide the pegs on
the visor along the peg channels on the sides of the display until the visor locks over the
ridge.
To remove the visor, push the visor back over the ridge and along the channels.
Squeeze
knobs
Rotating for Left/Right and Center
Viewing Adjustments
Ridge
Peg channel
Rotation for
left/right viewing
adjustment
Rotation for center
viewing adjustment