User's Manual

DIGITAL CONTROL INCORPORATED
xxxiv DigiTrak F5 Operator’s Manual
The short-range FS transmitter has a depth range of approximately 15 ft (4.6 m). It measures
8 in. (20.32 cm) long and 1.00 in. (2.54 cm) in diameter and broadcasts at 12 kHz.
Short-Range FS Transmitter
The High Interference Immunity Transmitter (PulseTrak) for F5 measures 15 in. (38.1 cm)
long and 1.25 in. (3.175 cm) in diameter and has a depth range of approximately ____ ft
(____ m). It broadcasts in dual frequencies and is specially designed for use in areas of high
interference.
Long-Range F5 Transmitter
The FC cable transmitter has a depth range of approximately 90 ft (27.4 m). It measures
19 in. (48.26 cm) long and 1.25 in. (3.175 cm) in diameter and broadcasts in 12 kHz. This
transmitter requires a housing that will accommodate the wire and also provide a good
ground connection to the base of the transmitter. For information on using the FC cable
transmitter and necessary Multi-Function Cable Box (MFCB), see the MFCB operator’s
manual available on our website.
FC Cable Transmitter
The long-range fluid pressure transmitters (FPT) provides down-hole fluid pressure readings
(from 0–250 psi or 0–1725 kPa) in addition to the standard transmitter data provided by other
F5 transmitters. The pressure sensors are located on the front end cap, with two sensor ports
situated on each side of the index slot. FPTs are available with two dual-frequency options:
19 kHz and 12 kHz (part number F5Dp 19/12) or 12 kHz and 1.3 kHz (part number
F5Dp 12/1.3). Like the other long-range F5 transmitters, the FPTs are 15 in. (38.1 cm) long
and 1.25 in. (3.175 cm) in diameter and have a depth range of approximately 65 ft (19.8 m).
Regional
designation
number
Index slot
Temp
dot
Transmitter serial
number
Regional designation number
(must match that of receiver)
Battery compartment
Front end cap with temp
dot and index slot