User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual xxvii
display returns to the Locate Mode screen with data recording turned off. When the system is
not recording but still has the P-T DataLog function enabled, toggling right from the Locate
Mode screen will re-open the P-T Start Recording menu
With a P-T job recording, toggling right from the Locate Mode screen will open the flag
recording menu:
DataLog Flag Recording Menu
Flags may be recorded at fixed intervals and at critical points along the bore path, such as
before and after crossing under a roadway or stream, for future reference when editing and
analyzing the data. Complete instructions for using the pressure-tension DataLog function
and the accompanying LWD software are provided in the DigiTrak LWD DataLog System
Operator’s Manual.
Locating Screens
The screens associated with locating include the Locate Mode screen, the depth mode
screen, and the predicted depth screen, each of which is described briefly below. For detailed
information, see Locating on page 15.
Exit (returns to locate
mode screen without
recording a new flag)
Set a flag (records flag
number indicated on
locate mode screen)