User's Manual

DIGITAL CONTROL INCORPORATED
xxiv DigiTrak F5 Operator’s Manual
Test Progress Screen
4. At the conclusion of a successful test, the receiver beeps four times and the locate
screen displays with no errors.
Successful Signal Self-Test Screen
Potential test failures
Background noise
If the test begins in an area with too much background noise, the test stops and the receiver
displays a warning similar to Background signal is too high. Find a lower-noise area and
try the test again.
Transmitter
If there is a problem with the depth antenna in the receiver, the receiver displays
the error message Fault: Depth Antenna Failure on the locate screen and locks
the receiver. Contact DCI Customer Service.