User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak F5 Operator’s Manual xiii
To check the charge on the battery pack, push the battery status button located under
the LEDs below the battery tab. The LEDs will illuminate to indicate the amount of charge
remaining. See Battery Charger on page liv for more information.
Power On
To turn on the receiver, pull and hold the trigger switch for at least two seconds, then release.
A series of beeps will sound, then a screen with the F5 logo displays while the receiver
performs a self-test, followed by the warning screen shown below .
Receiver Warning Screen
Pull and release (click) the trigger to acknowledge you have read and understand this
manual. If all items of the self-test passed, the startup screen displays.
Receiver Startup Screen
Click the trigger to exit the startup screen and open the Main Menu (see page xiv).
Regional
designation
number (must
match that of
transmitter)
System name
Receiver ID number
Software version
Web address
Customer service
phone numbers