User's Manual

Table Of Contents
Transmitter
40 DigiTrak
®
F2
®
Operator’s Manual
Battery Compartment End Front End Cap
Slot Position
Slot Length
8.5 in. (21.6 cm)
2.0 in.
(5.1 cm)
FX Transmitter Housing Slot Requirements
For both the 12-kHz and 19-kHz extended long-range FXL transmitters (19 in./48.26 cm long), the slots
must be at least 13 in. (33 cm) long and begin at least 2 in. (5.1 cm) but not more than 3 in. (7.6 cm) from
the front of the transmitter, as shown below.
Battery Compartment End Front End Cap
Slot Position
Slot Length
13 in. (33 cm)
2 in.
(5.1 cm)
FXL Transmitter Housing Slot Requirements
For the short-range FS transmitter (8 in./20.32 cm long), the slots must be at least 3.75 in. (9.5 cm) long
and begin at least 1.25 in. (3.2 cm) from the front or index cap end of the transmitter, as shown below.
Battery
Compartment End
Index
Cap End
Slot Position
Slot Length
3.75 in. (9.5 cm)
1.25 in.
(3.2 cm)
FS Transmitter Housing Slot Requirements
For the FC cable transmitter (19 in./48.26 cm long), the slots must be at least 9 in. (22.9 cm) long and
begin at least 2.5 in. (6.4 cm) from the front or index cap end of the transmitter, as shown below.
Wireline End Index Cap End
Slot Position
Slot Length
9 in. (22.9 cm)
2.5 in.
(6.4 cm)
FC Transmitter Housing Slot Requirements