User's Manual

Remote Display
DigiTrak
®
F5™ Operator’s Manual 47
Main Menu
The main menu is accessed by pushing the down arrow button. It displays the menu options with the
remote mode option automatically highlighted for selection.
FSD Main Menu Screen
Use the arrow buttons to highlight an option, and press the execute button to select that option. The table
below lists the main menu options and the result of selecting each item.
FSD Main Menu Options
Remote Mode – Puts the FSD unit into remote mode so that it can display
information from the receiver, including transmitter pitch, roll, temperature, battery
status, depth, predicted depth, and Target Steering data. See “Remote Mode”
below.
Power Off – Turns off the unit with no audible signal.
Settings Menu – Opens the settings menu so that you can change telemetry
channels, pitch and depth units, and the receiver model. See “Settings Menu”
below.
Contrast Adjustment – Allows you to adjust the screen contrast. See “Contrast
Adjustment” below.
Cable Mode – Enables use of the FC cable transmitter and the SST transmitter.
Please see the DigiTrak Multi-Function Cable Box (MFCB) Operator's Manual for
operating instructions.
Information – Displays FSD system information such as the software version,
serial number, telemetry configuration, and current settings.
Remote mode
(shown highlighted)
Contrast adjustment
Power off
Information
Settings menu
Description of
highlighted option
Cable mode