User's Manual
Table Of Contents
- Safety Precautions and Warnings
- Dear Customer:
- Introduction
- Receiver
- General Description
- Toggle and Trigger Switches
- Audible Tones
- Installing and Removing the Battery Pack
- Power On
- Power Off
- Main Menu
- Locate Mode
- Calibration Menu
- Height-Above-Ground (HAG) Menu
- Settings Menu
- Transmitter Selection Menu
- Drill DataLog Menu
- Pressure-Tension DataLog Menu
- Using the Keypad
- Display Screens
- Standard Receiver Display Screen Symbols
- Transmitter
- Remote Display
- Battery Charger
- System Setup
- Locating
- The Target Steering Function
- Appendix A: System Specifications and Maintenance Requirements
- Appendix B: Projected Depth Versus Actual Depth and the Fore/Aft Offset
- Appendix C: Calculating Depth Based on Distance Between FLP and RLP
- Appendix D: Reference Tables
- LIMITED WARRANTY
Transmitter
38 DigiTrak
®
F5™ Operator’s Manual
Transmitter Selection Menu Options
Menu Option Model Number Frequency Menu Option Model Number Frequency
5XD 19/12 19.2 kHz
FC 12 kHz
5XD 19/12 12 kHz
F5Dp 19/12 19.2 kHz
5XD 12/1.3 Single High
(SH) at 12 kHz
F5Dp 19/12 12 kHz
5XD 12/1.3 Dual High (DH)
at 12 kHz
F5Dp 12/1.3 Single High
(SH) at 12 kHz
5XD 12/1.3 Dual Low (DL)
at 1.3 kHz
F5Dp 12/1.3 Dual High (DH)
at 12 kHz
5X 18.5 18.5 kHz
F5Dp 12/1.3 Dual Low (DL)
at 1.3 kHz
5X 8.4 8.4 kHz
TT5 12 kHz
FX 19.2
FXL 19.2
19.2 kHz
DDS 12
DDT 12
12 kHz
FS
FX
FXL
12 kHz
SST* 12 kHz
*The SST option only appears if your F5 receiver has been upgraded for the SST function.
Once an option is selected, the screen will return to the main menu with the type and frequency of the
selected transmitter displayed at the top of the screen.