User's Manual
Table Of Contents
- Safety Precautions and Warnings
- Dear Customer:
- Introduction
- Receiver
- General Description
- Toggle and Trigger Switches
- Audible Tones
- Installing and Removing the Battery Pack
- Power On
- Power Off
- Main Menu
- Locate Mode
- Calibration Menu
- Height-Above-Ground (HAG) Menu
- Settings Menu
- Transmitter Selection Menu
- Drill DataLog Menu
- Pressure-Tension DataLog Menu
- Using the Keypad
- Display Screens
- Standard Receiver Display Screen Symbols
- Transmitter
- Remote Display
- Battery Charger
- System Setup
- Locating
- The Target Steering Function
- Appendix A: System Specifications and Maintenance Requirements
- Appendix B: Projected Depth Versus Actual Depth and the Fore/Aft Offset
- Appendix C: Calculating Depth Based on Distance Between FLP and RLP
- Appendix D: Reference Tables
- LIMITED WARRANTY
Receiver
22 DigiTrak
®
F5™ Operator’s Manual
Drill DataLog Menu
The drill DataLog menu provides the options needed for you to record your pilot hole drill data
electronically. It appears on two different screens, as shown below.
Drill DataLog Menu, First Screen
Drill DataLog Menu, Second Screen
The drill DataLog menu allows you to enable or disable the drill DataLog function, to set up new drill jobs,
to view and delete drill jobs from the receiver, and to upload drill jobs via Bluetooth technology to a
computer with DigiTrak LWD software installed. The LWD software has a variety of options for analyzing,
editing, displaying, printing, storing, and e-mailing the drill data. Complete instructions for using the
DataLog function and the accompanying LWD software are provided in the DigiTrak LWD DataLog
System Operator’s Manual.
Will read “Disabled,
click to enable” if
logging is disabled
Exit (returns to
main menu)
Description of
highlighted option
Delete drill DataLog
job or jobs
Set survey point
View drill DataLog jobs
Set up drill DataLog job
(shown highlighted)
Upload drill DataLog
job to a computer
Enable/disable drill
DataLog function
(green if enabled,
red if disabled)
Enable/disable drill
DataLog function
(green if enabled,
red if disabled)