User's Manual

Receiver
14 DigiTrak
®
F5™ Operator’s Manual
Power Off
To turn off the receiver, select the power off option in the main menu (see below). Four short beeps will
sound as the unit turns off.
Automatic Shutdown – The receiver will automatically shut down after 15 minutes of inactivity or after 30
minutes of inactivity when the receiver is in Target Steering mode.
Main Menu
To access the main menu from the startup screen, click the trigger. When locating, you can access the
main menu by pushing the toggle switch down (toward the handle). Use the toggle to highlight different
menu options and click the trigger to select a menu option.
The main menu appears on two different screens, as shown below. A down arrow in the lower right
corner indicates more menu options below (on the next screen); an up arrow indicates more options
above (on the previous screen).
Receiver Main Menu, First Screen
Receiver Main Menu, Second Screen
Receiver battery status
(shown fully charged)
Calibration menu
Settings menu
Transmitter selection
menu
Locate mode
(blue color indicates
option is highlighted
for selection)
Power off
Height-above-ground
(HAG) menu
Down arrow indicates
more options below
(toggle down to view)
Telemetry channel
Description of
highlighted option
Drill DataLog menu
Diagnostics
Up arrow indicates
more options above
(toggle up to view)
System information
Transmitter type
and frequency
Pressure-tension
(P-T) DataLog menu