User's Manual

System Setup
64 DigiTrak
®
F5™ Operator’s Manual
HAG Menu Screen
3. Click the trigger to enable the HAG at the value shown at the bottom of the screen. The
confirmation signal will sound as the screen returns to the main menu. Depth readings must be
taken with the receiver held at this height.
If you want to change the HAG value, then select the set and enable HAG option to open the
keypad and set a new HAG value. The keypad will appear slightly differently depending on the
units the receiver is set to display (see “Using the Keypad” in the Receiver section).
Standard Keypad
Enter the desired HAG value using the toggle switch to highlight a number or decimal point and
clicking the trigger to enter that selection in the display window. Enter one digit at a time, from left
to right. Once the desired value is in the display window, select the return arrow to lock in the new
HAG value and enable the HAG function. The confirmation signal will sound as the screen returns
to the main menu.
Set and
Enable HAG
Exit
Disable HAG
Enable HAG
(Shown
Highlighted)
Description of
Highlighted Selection
with Current HAG
Setting in Inches or
Meters
Return Arrow
(Shown Highlighted
for Selection)
Display Window
Exit (Returns
to Main Menu)
Decimal Point
Backspace