User's Manual

DIGITAL CONTROL INCORPORATED
DigiTrak
®
F5™ Operator’s Manual 51
Battery Charger
F Series Battery Charger System
General Description
The DigiTrak F Series Battery Charger (FBC) system includes AC and DC power cords, an AC adapter,
and three rechargeable F Series battery packs. The battery packs are used to power the F5 receiver and
the FSD remote. The AC power cord provided with your system is standard to your global area of
operation.
A fully charged battery pack will power an F5 receiver for
approximately 10 hours or an FSD remote for approximately 14
hours before recharging is necessary. A battery pack can be
recharged about 400 times before the battery life is reduced
substantially.
Checking Battery Status
To check the charge status of a battery pack, press the battery
status button below the five LEDs. The LEDs indicate the charge
level, with each representing 20% of the battery charge.
The battery charge status can be checked at any time, even
when the battery is installed in a unit.
AC
Adapter
AC Power
Cord
F Series
Battery
Charger
F Series
Battery Packs
DC Power
Cord
F Series Battery Pack
Tab
LEDs
Indicate
Charge
Level
(Shown
Full)
Battery
Status
Button
(Press)