User's Manual

Remote Display
DigiTrak
®
F5™ Operator’s Manual 49
Depth Display Screen
The depth or predicted depth of the transmitter can be viewed on the remote display, but only when the
receiver is positioned at the locate line (LL) or at the front locate point (FLP) with its trigger held in. See
“Locate Points (FLP & RLP) and Locate Line (LL)” in the Locating section for information on correctly
positioning the receiver.
When the receiver is positioned at the LL with the trigger held in, the FSD display will change to show the
depth reading with arrows pointing to the ground and drill head. When the height-above-ground function
is turned on, the receiver icon is shown elevated above the ground with the HAG setting displayed. In the
figure below you can see that the HAG setting is 2' 03" to indicate that the receiver is being held that
distance above the ground. For more information on the HAG settings, see “Set Height-Above-Ground
(HAG) Distance” in the System Setup section.
FSD Depth Display at Locate Line with HAG On
The depth will display for 10 seconds after the trigger on the receiver is released, and then the display will
return to the main display screen.
When a roll offset is set at the receiver, the letters RO will display at the bottom right of the clock circle on
the depth display and on the predicted depth display. For more information, see “Roll Offset Menu” in the
Receiver section and “Set Roll Offset” in the System Setup section.
HAG Setting
Depth Reading
Roll Offset
Indicator Appears
Here If It Has Been
Enabled on the
Receiver