User's Manual

Remote Display
46 DigiTrak
®
F5™ Operator’s Manual
Remote Mode
The remote mode option opens the FSD main display screen, which is the default screen you will see
after turning on the FSD remote. It shows the transmitter pitch, roll, battery status, and temperature. The
main screen also shows the FSD battery status, receiver type, telemetry channel, telemetry update meter,
and Target Steering data (if active). To exit this screen at any time, press the down arrow button to return
to the main menu.
FSD Main Display Screen
For more information about the FSD main display screen and the FSD depth display screens, please see
“Display Screens” later in this section.
Settings Menu
The settings menu, shown below, will appear after selecting the settings menu at the main menu screen.
FSD Settings Menu Screen
Telemetry Channel
(Shown Highlighted)
Depth Units
Receiver Model
Exit
Telemetry Frequency
Designation
Function o
f
Highlighted Option
Pitch Units
Transmitter
Temperature
(Displays in
Celsius if Metric
Units Are Selected)
Transmitter Battery
Status (Alkaline Only)
Transmitter Pitch
Receiver Type with
Telemetry Channel
FSD Battery Status
Transmitter Roll
Telemetry Update
Meter
Thermometer for
Transmitter
Temperature
Roll Offset Indicator
(Displays if Roll Offset
Is Set on Receiver)