User's Manual

Receiver
DigiTrak
®
F5™ Operator’s Manual 23
Standard Keypad
To input a value, use the toggle switch to highlight the number or decimal you want to select, then click
the trigger to select it. Do this for each digit from left to right. To delete the last digit entered, select the
backspace button. Once the desired number is in the display window, select the return arrow to lock in
the value and turn on the function.
The keypad appears differently if the receiver units are set to feet and inches (x’xx”).
Feet and Inches Keypad
The same method is used to input values in this keypad, except separate values must be input for both
the foot setting and the inch setting. When the foot setting is active, as shown above, numbers entered on
the keypad and shown in the display window will represent the foot value. To enter the inch value, toggle
to highlight the inch setting option and click the trigger to select it. The foot setting option will become
inactive, and numbers entered on the keypad and shown in the display window will represent the inch
value.
Inch Setting
(Shown Inactive)
Display Window
Exit (Returns
to Main Menu)
Return Arrow
(Enter)
Foot Setting
(Shown Active)
Backspace
Return Arrow
(Shown Highlighted
for Selection)
Display Window
Exit (Returns
to Main Menu)
Decimal Point
Backspace