User's Manual

Receiver
22 DigiTrak
®
F5™ Operator’s Manual
Standard DataLog Menu, First Screen
Standard Datalog Menu, Second Screen
The DataLog option allows you to record your pilot hole drill data electronically. The F5 DataLog function
is used with the DigiTrak LWD (Log-While-Drilling) software, which transfers the data from the F5 receiver
to a computer via Bluetooth technology. The LWD software has a variety of options for analyzing, dis-
playing, printing, storing, and e-mailing the drill data. Complete instructions for using the DataLog function
and the accompanying LWD software are provided in the DigiTrak LWD DataLog System Operator’s
Manual.
Using the Keypad
A keypad is provided in several menus for entering values at the receiver. It is used for setting the height-
above-ground value in the HAG function, setting a target depth in the Target Steering function, and
programming rod lengths and a survey point in the DataLog function. A variation of the keypad is used to
set the date and time when using the DataLog function.
The standard keypad appears when the keypad icon is selected and the receiver units are set to meters
(x.xx m), feet (x.xx’), or inches (xx”).
Will Read
“Disabled, click to
enable” if Logging Is
Disabled
Exit (Returns
to Main Menu)
Description of
Highlighted Item
Delete DataLog Jobs
Set Survey Point
V
iew DataLog Jobs
Setup DataLog Job
Upload DataLog
Job to a Computer
Enable/Disable DataLog
(Green if Enabled, Red
if Disabled)