User's Manual

Receiver
DigiTrak
®
F5™ Operator’s Manual 21
Transmitter Selection Menu, First Screen
Transmitter Selection Menu, Second Screen
Use the toggle switch to highlight the desired transmitter type then click the trigger. If the transmitter type
selected has more than one model option, as in the case of F5, F Series, Cable, and FPT transmitters,
another screen will appear with the transmitter models. Use the toggle switch to highlight the desired
transmitter then click the trigger to select it. If the transmitter selected is a dual frequency transmitter, an
additional screen will show where you can select the frequency you will be using. Once a transmitter
selection is made, you will be returned to the main menu with the new transmitter selection showing at the
top of the screen. Selecting EXIT will return you to the previous screen with no change to the transmitter
selection. See the Transmitter section for more information on the transmitter options.
Standard DataLog Menu
The standard DataLog menu appears on two different screens, as shown below. A down arrow in the
lower right corner indicates more menu options below (on the next screen); an up arrow indicates more
options above (on the previous screen).
Description of
Item Highlighted
for Selection
Current
Transmitter
Selection
Down Arrow
Indicates Additional
Menu Items
(Toggle Down)
Highlighted
for Selection
Up Arrow Indicates
Additional Menu
Items (Toggle Up)
Exit