User's Manual

Receiver
14 DigiTrak
®
F5™ Operator’s Manual
Main Menu
To access the main menu from the startup screen, click the trigger. When locating, you can access the
main menu by pushing the toggle switch down (toward the handle). Use the toggle to highlight different
menu options and click the trigger to select menu items.
The main menu appears on two different screens, as shown below. A down arrow in the lower right
corner indicates more menu options below (on the next screen); an up arrow indicates more options
above (on the previous screen).
Receiver Main Menu Screens
The main menu screen also displays the receiver battery status (in the top right corner), the transmitter
type and frequency setting (to the left of the battery status), and the current telemetry channel selection
(channel 1 is shown in the example above). These items are displayed on all receiver menu screens.
The options available on the main menu are summarized below.
Receiver Battery Status
(Shown Fully Charged)
Calibration Menu
Settings Menu
Transmitter Selection
Menu
Locate Mode
Power Of
f
Height-Above-
Ground (HAG) Menu
Blue Colo
r
Indicates
Item Is Highlighted
for Selection
Down Arrow Indicates
More Menu Options
Below (Toggle Down
to View)
Telemetry Channel
Description of
Highlighted Selection
Standard DataLog
Menu
Diagnostics
Up Arrow Indicates
More Menu Items
Above (Toggle Up
to View)
System Information
Transmitter Type and
Frequency
Pressure-Tension
DataLog Menu