User's Manual

Recording Data
30 Eclipse
®
TensiTrak
®
Operator’s Manual
3. Stop Saving Data
After the installation is complete, you must tell the receiver to stop saving data. To do this:
1. Toggle up, and you will see the Stop Data Saving dialog box.
Stop Data Saving Dialog Box
2. Toggle right to select Y for yes.
3. Click the trigger
NOTE: The Eclipse receiver can be shut off and on and the battery changed without affecting the
presaved data. Once the receiver is restarted and returned to Tension saving mode, it will
append the data properly.
NOTE: It is strongly suggested that you transfer the TensiTrak data to the computer from the
receiver as soon as convenient to avoid the possibility of data loss.
Congratulations! You are now ready to save another job or to transfer this job to the computer. For
transferring instructions, see the Transferring Data to Computer section.