User's Manual

Recording Data
Eclipse
®
TensiTrak
®
Operator’s Manual 29
Tension Mode Receiver Display Screen
NOTE: If there is no live data being received from the TensiTrak unit or if the unit is out of range,
the data point counter and the beeper will stop.
SUGGESTION: Because the TensiTrak unit creates a time-based graph, it is recommended that
you document corresponding site conditions for data points. For example, you
might save information such as “data point 300 was 100 ft (30.5 m) into the
pullback.”
2. Track the TensiTrak Unit’s Depth and Position
If you would like to track the TensiTrak unit’s position and depth, you can do so using the locate points
and locate line, as with other Eclipse transmitters. For complete information about the locating procedure,
see the Eclipse operator’s manual.
“S” indicates
Saving Mode
Data Point
Number