User's Manual

Using Receiver Menus
22 Eclipse
®
TensiTrak
®
Operator’s Manual
DataLog
Send Tension Data Delete Tension Data Exit
Tension DataLog
Job Number
From Eclipse Main Menu
List Saved Job Number
Eclipse Receiver TensiTrak Menus
To use the TensiTrak menus, select a menu option using the toggle, then click the trigger. The available
menu options and their functions are found by selecting DataLog from the Eclipse main menu and then
selecting Tension DataLog.
¾ Job Number – Displays the last pullback job number used, and allows you to change the job
number. Used when assigning a job number to a new run.
¾ Send Tension Data – Sends the TensiTrak data to the computer via the receiver’s infrared port
(see Transferring Data from Receiver to Computer section for more information).
¾ Delete Tension Data – Deletes all data from all jobs saved in the receiver.
WARNING: The Delete Tension Data option will delete ALL data in the receiver. You cannot
clear specific jobs. Be sure you have transferred and saved the data on your com-
puter before you use this menu option. Once the data is deleted from the receiver, it
cannot be retrieved.
¾ List Saved Job Number – Lists all job numbers saved in the receiver. Used to determine the
next number to assign when starting a new job.
NOTE: It is strongly suggested that you transfer the TensiTrak data to the computer from the
receiver as soon as convenient to avoid the possibility of data loss.
¾ Exit – Returns you to the Eclipse main menu.