User's Manual

DIGITAL CONTROL INCORPORATED
Eclipse
®
TensiTrak
®
Operator’s Manual 21
Using TensiTrak Menus
on Receiver
Your receiver has a set of TensiTrak menus for operating the TensiTrak system. To view the TensiTrak
menu options, select the DataLog option from the Eclipse main menu (where the menu options are
Locate, Power Off, Set US, Configure, High/Low Fre, Tension, and DataLog). Then select the
Tension DataLog option to advance to the TensiTrak main menu screen, which is shown below and
discussed further in this section.
TensiTrak Main Menu Screen
The TensiTrak main menu screen shows only the first two menu options. The Job Number option is
currently selected, as indicated by the selection arrows surrounding it. The scroll right arrow at the end of
the menu bar, just after the Send Tension Data option, indicates there are more options to the right. To
see the other options, toggle right. The other menu options are Delete Tension Data, List Saved Job
Number, and Exit.
Selection
Arrows
Scroll Right
Arrow
Job Number
Send Tension Data