User's Manual

Quick Start Guide
Eclipse
®
TensiTrak
®
Operator’s Manual 17
Start/Stop Saving Data
Start Saving Data (Optional – for Data to be Transferred to Computer)
When you are ready to start the HDD installation, you will want to start the receiver’s saving mode. To do
so, from Tension mode, toggle up and answer Y for yes in the Start Data Saving dialog box.
Start Data Saving Dialog Box
The letter S for saving appears on the right side of the receiver’s screen and the data point will start
counting up (by one) every 3 seconds, which is the data collection interval. The receiver will beep to
confirm active data saving. You may want to document the data point to the corresponding site conditions
for comparison purposes after transferring the data to your computer.
Tension Mode Receiver Display Screen
“S” indicates
Saving Mode
Data Point
Number