User's Manual

Receiver
34 DigiTrak
®
F5
®
Operator’s Manual
DigiTrak LWD Basic Menu Symbols
Standard Transmitter – Select when logging data from a standard, non-pressure
sensing, transmitter.
Pressure Sensing Transmitter – Select when logging data from a pressure
sensing transmitter.
TensiTrak Transmitter – Select when logging data from a TensiTrak transmitter.
Create New Job – Select to start logging a new drilling job.
Append Existing Job – Select to continue logging on a previously opened drilling
job. You must select the job type and number from the list. A maximum of 20 bores
can be saved for appending.
Stop Job – Select to stop recording data points on an open job. This will close the
job. The job can be viewed, reopened, appended, and uploaded until it is deleted
from the job list.
Delete One Job – Select to delete a specific drilling job log. You must select the
job type and number you wish to delete from the list.
Delete All Jobs – Select to delete all drilling jobs logged. All existing jobs will be
selected for deletion from the receiver.
Confirm Delete – Appears in menu after a delete jobs option has been selected.
Select this option to confirm deletion or select exit to cancel deletion.
Record Depth/Pitch – Select to log a data point with depth and pitch information.
Record Pitch – Select to log a data point with only pitch information.
Record Blank Rod – Select to log a data point with no pitch or depth information.
Record Partial Rod – Select to log a data point after drilling ¼, ½, or ¾ of rod and
to log a data point after finishing the partial rod.
View/Delete Rod Data – Select to view all logged data points and to delete the last
logged data point.