User's Manual

Receiver
32 DigiTrak
®
F5
®
Operator’s Manual
To turn off the roll offset function, select the disable the roll offset option from the roll offset menu. The
confirmation tone will sound as the screen returns to the settings menu. The value that displays for roll on
the locate mode screens will be that of the transmitter.
Transmitter Selection Menu
The transmitter selection menu allows you to select the type (“F” for an F Series or “F5” for an F5
transmitter) and frequency (1.3 kHz, 8.4 kHz, 12 kHz, 18.5 kHz, or 19 kHz) of transmitter you are using.
If a new transmitter selection is made, calibration will be required. Calibration coefficients are saved for
each transmitter option therefore calibration is not required when switching between transmitters that
were last calibrated under the transmitter option being used. Calibration is required every time a new
transmitter or housing is used.
When the transmitter selection menu is selected from the main menu, a screen such as the following will
display.
Transmitter Selection Menu
The current transmitter selection is highlighted automatically. Use the toggle switch to highlight the
desired option then pull the trigger. Selecting “Exit” will return you to the main menu with no change to the
transmitter selection. See the Transmitter section for more information on the transmitter options.
Description of
Item Highlighted
for Selection
Current
Transmitter
Selection
Indicates
Additional
Menu Items
(toggle down)
Highlighted
for Selection