User's Manual

Receiver
DigiTrak
®
F5
®
Operator’s Manual 31
Roll Offset Menu
Roll offset is needed when the 12 o’clock position of the transmitter cannot be indexed to that of the drill
head. The roll offset function is an electronic compensation to match the transmitter’s 12 o’clock position
to the drill head’s 12 o’clock position.
Roll Offset Menu
To electronically compensate the transmitter to match the drill head’s 12 o’clock position, select the
enable roll offset option from the roll offset menu. A screen such as the following will display.
Enable Roll Offset Menu
Ensure the drill head is as its 12 o’clock position and that the transmitter is on (showing a roll value on the
screen). With the set roll offset option highlighted, pull the trigger to activate it. The confirmation tone will
sound and you will be returned to the settings menu.
Disable Roll Offset
Exit Button
Enable Roll Offset
(Shown Highlighted)
Set Roll Offset
(Shown Highlighted)
Exit Button
Clock Face
Showing
Transmitter’s
Uncompensated
Roll Position