User's Manual

Receiver
28 DigiTrak
®
F5
®
Operator’s Manual
Settings Menu
The settings menu allows has six menu options shown below.
Receiver Settings Menu
Use the toggle switch to highlight an option, and then pull the trigger to select it. Each item is discussed in
detail below.
Depth Units Menu
The depth units menu displays four options: xx" represents the use of inches only; x'xx" represents the
use of both feet and inches; x.xx m represents the use of metric units (meters and centimeters); and x.xx'
represents the use of feet only. Use the toggle switch to highlight the desired option and pull the trigger to
select it. You will hear the confirmation signal and be returned to the settings menu with the exit option
highlighters.
NOTE: The temperature units are determined by the depth units selected. Celsius (°C) temperature
units will display if metric depth units are selected, and Fahrenheit (°F) temperature units will
display if English depth units (inches or feet and inches) are selected.
Pitch Units Menu
The pitch units menu has two options, degrees (x°) and percent (x%). Use the toggle switch to highlight
the desired option and pull the trigger to select it. You will hear the confirmation signal and be returned to
the settings menu with the exit option highlighted.
Depth Units Menu
(Shown Highlighted)
Exit
Pitch Units Menu
Roll Offset Menu
Telemetry Channel
Menu
Current
Setting of
Highlighted
Option
Time and
Calendar