User's Manual

Table Of Contents
Receiver
DigiTrak
®
F5
®
Operator’s Manual 19
Main Menu
The main menu screen appears after the startup screen in the power on sequence. To access the main
menu from the locate mode screen, toggle down (push toggle switch toward the handle). Use the toggle
switch to highlight different menu options and pull the trigger switch to select menu items.
The main menu is shown below followed by a description of each menu option.
Receiver Main Menu Screen I
Receiver Main Menu Screen II
The main menu screen also displays the receiver battery status (in the top right corner), the transmitter
frequency setting (to the left of the battery status), and the current telemetry channel selection (channel 1
is shown in the example above).
The table below summarizes the main menu options.
Receiver Battery Status
(Shown 80% Full)
Calibration Menu
Settings Menu
Transmitter Selection
Menu
Locate Mode
Power Off
HAG Menu
Box around item
indicates it is high-
lighted for selection.
Arrow Indicates
Additional Menu
Items Below (toggle
down to view)
Telemetry Channel
Description of
Highlighted
Selection
DigiTrak LWD (Log
While Drilling) Menu
Pre-Drill Checklist
Arrow Indicates
Additional Menu
Items Above (toggle
up to view)
System Information
Transmitter Type and
Frequency