Installation guide

46
Installation Guide
GB
13. TROUBLESHOOTING
Software crash In the unlikely event of a software crash,
(receiver no unplug the receiver from the power supply. Plug it
longer works) back in after 10 second. This will normally solve the problem.
Please note that a software crash is not a malfunction and
therefore is not covered by the warranty. Software crashes
on devices of this type (which also include PCs, wireless
    networkingequipment,etc.)arerectifiedquicklyandeasily
in this way.
The remote control The batteries are spent. Replace the batteries.
is not working.
The remote control may also be incorrectly aligned. Try
pointing the remote control to the front panel of the receiver,
ensuring that there are no obstructions between the remote
control and the receiver.
The channel has Delete the channel and carry out an automatic
anewfrequencyand search.
is no longer being
broadcast with the
same channel infos.
I want to exit the Press FAV button or 1 on the keypad.
Favourites List.
Password The default password is 0000.
Forgot my Please contact the Sercice Hotline if you have
personal password, forgotten your personal password.
Channel-List You can download the Channel-List
Editor Editor at www.digitalbox.de.
Factory Settings To restore the factory settings, press and hold the standby
button on the front panel of your receiver for more than
10 seconds.
Warning! This will delete your personal settings.
External USB storage Switch off the receiver at the mains switch.
device is Reconnect the USB storage device.
not recognized. Reset the receiver to normal mode.
The common USB storage devices known to us are
compatible with this receiver. For larger USB drives,
use an external mains power supply and follow the
operating guidelines for the USB drive.
If you still cannot resolve the issue, contact your dealer or the manufacturer.