Installation guide

35 DVB-S Receiver
GB
Parental Lock (factory default password: 0000)
• MenuLock:Whenenabled,thereceivermenuislocked.
• ChannelLock(ParentalControls):Enable/disabletochangethelockontheChannel
List menu
• New Password: Used to set a new password. (Make sure you remember the new
password.)
• ConfirmPassword:Confirmpasswordbyre-enteringit.
Factory Reset
Resets password to the factory settings. Any changes you have made are reset. The
receiver starts up in normal mode with all of the default factory settings.
Upgrade
Updating software has nothing to do with saving new TV channels. Its only purpose is to
update the operating software on the receiver.
Under normal circumstances, a software update is notrequiredforregularoperation
of the receiver.
We recommend that you also load the factory settings before and after the update. Be
aware this will cause you to lose your own Channel List.
S/W Upgrade by satellite (OTA)
Here you can upgrade the receiver software by OTA (Over the air). We recomment to
don’tchangeanyvalue.Otherwiseitisn’tpossibletousethiskindofupdate.Youmust
point your satellite system towards ASTRA1 19.2°East to carry out the software update.
The software update can take up to one hour.
To start the OTA upgrade please choose the start button. Follow the instruction in the next
window.Notice:It’snotpossibletoupgrade,whennonewerreceiversoftwareisavailable.
8. USING THE RECEIVER