Installation guide

34Installation Guide
GB
Timer Settings
The timer function is used to programme the receiver to begin a specific action, such as
recording, at a defined time. Eight (8) pre-programmed timer settings are available.
Sub-menu Description
Timer Number Select timer number 1-8..
TimerMode  Specifiestherepetitionfrequency(Once,Daily,Weekly,Off).
    The„Off“settingdisablesthetimer.
Timer Service Channel: At the programmed time, the receiver switches to
the programmed show (even from standby).
Record: If an external USB storage device is properly
connected, you can programme timed recording sessions.
Start Channel Channel selection
Start Date Enter the show start date.
On at Enter the show start time.
Length Enter the show length.
Saveyourentriesbyconfirmingthe„Save“screenwithOK.
8.8 Settings (symbol: film reel)
Firmware Information
Shows receiver information:
• Bootloader   CurrentVersionofbootloader
• Service   internalservice
• Maincode   CurrentVersionofMaincode
• Menulogo   CurrentVersionofMenulogo
• Bootlogo   CurrentVersionofBootlogo
• DefaultDB   CurrentVersionoffactorychannellist
• UserDB   CurrentVersionofCustomerchannellist
8. USING THE RECEIVER