Installation guide

26Installation Guide
GB
• SatelliteList
A list of all saved satellites is displayed.
You can enable or disable specific satellites using the OK button. Selections are indicated
by a tick.
Change (red function key): Used to edit the name and position of the satellite. This is
important for rotary antennas.
New (green function key): Used to add a satellite manually.
Delete (blue function key): Used to delete a saved satellite and its channels.
• TPList
Inthissub-menu,youcaneditthetranspondersenabledinthe„SatelliteList“sub-menu.
• Change(redfunctionkey):Changestheparametersoftheselectedtransponder.Be
aware that this will affect the channels of the transponder you have changed!
• New(greenfunctionkey):Anewtransponderwhichhasnotyetbeensavedcanbe
created here. Use this function to search for a channel if you know the necessary
information.
• Delete(yellowfunctionkey):Deletestheselectedtransponder.
• Search(bluefunctionkey):Searchestheselectedtransponderfornewchannelswhile
applying the search filter settings.
Example of a channel search:
Youknowthatnewchannelsarebeingbroadcastonaspecificfrequency.
Satellite: ASTRA 19.2° East
Frequency:10836MHz
Symbol rate: 22,000 Ks/s
Polarisation: Horizontal
8. USING THE RECEIVER