Installation guide

25 DVB-S Receiver
GB
8.4 Navigating in the menus
The , , und . buttons are used to navigate in the menus. Selected menu items
are highlighted. Click OK to make your selection. Press EXIT to exit the menu. Changes
mustalsobeconfirmed.Certainchangeswillrequireyoutoacknowledgeaconfirmation
prompt.
Example: Setting the receiver to summer time
PresstheMENUbutton,selectSystemSettings,pressOK,selectTime&TimerSettings,
press OK,select Local Time Settings, press OK. Enable Use GMT using the or
button.
Under GMT Difference, set thetimezone according to yourlocation(Germany: „GMT
+01:00“).EnableSummerTimeusingthe or button. Press EXIT to exit the menu.
8.5 Installation (symbol: sat antenna)
• Antenna Settings
Instructionsfor„Antennaswithfixedinstallation“defaultsetting
Satellite: Satellite selection. All satellites which are enabled in the Satellite List sub-
menu are listed here. Select the satellite you want to edit.
LNBFrequency:SetthecorrespondingLNBfrequencyfortheselectedsatellite.The
default setting is universal.
LNB Power: LNB power can switch on/off
Transponder: List of available transponders
DiSEqC1.0:Settingformultiplesatellitereception
22K: Automatically set by the receiver
Polarisation:Defaultsettingis„AUTO“.However,horizontalorverticalLNBsupply
voltage can also be set.
Save changes: Yes: it will save the changes after exit
No: no saving
8. USING THE RECEIVER