User manual

CHAPTER 3
SHOWPIX® Menu System
SHOWPIX® Pixelation Luminaire User Manual 21
Menu System Options
The following sections describe and give examples for selecting and/or setting available menu
options.
DMX Address Menu
DMX Address is the top level menu selection used to set the fixture’s DMX start channel. Use
this menu option, to change the existing DMX start channel to another DMX start channel.
Setting DMX Start Channel
To set the DMX start channel:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus.
DMX ADDRESS MENU is the first menu item at the top level.
2. Press the Enter button to select. The display will show SET DMX START CHANNEL:###. The
display will show the start channel currently assigned to the fixture.
3. Use the up and down arrows on the Center button to select a new DMX start channel from
001– 483. The display will flash a new option ready for selection.
Note: The last valid Start channel for a SHOWPIX fixture will depend on
which protocol you have selected, see
Determining a DMX Start
Channel on page 32.
4. Press the Enter button to accept the new DMX Start channel.
INFORMATION
MENU
MODULE VERSION MENU
PAN
HW:# SW:#
Displays the Hardware and
Software versions for each logic
board in the fixture.
Displays NOT AVAILABLE if a board
does not exist in that position.
TILT
HW:# SW:#
LED CPU CHAN 1
HW:# SW:#
LED CPU CHAN 2
HW:# SW:#
LED CPU CHAN 3
HW:# SW:#
DISPLAY ERRORS
DISPLAY ERRORS MENU
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Scrolls through errors displayed in
2-line, 16-character format
CHANNELS NEEDED: ##
Displays channel range for current
Protocol selected (70 for
SHOWPIX Standard Protocol)
NEXT DMX CHANNEL: ##
(Current start channel + channels
needed)
Level 1 Level 2 Level 3 Level 4 Option/Setting Description/Notes