User manual

CHAPTER 3
SHOWPIX® Menu System
SHOWPIX® Pixelation Luminaire User Manual 17
unlocks to protect against an inadvertent menu change. DMX Address Menu is the first option
on the top menu level.
Exiting the Menu System
To exit the menu system, keep pressing the Menu button to back out of each menu level until
the High End Systems logo appears. The word
AUTOLOCK will appear briefly on the display to
indicate the fixture’s software is “locking” the display. The display switches back to the large
8-character format and, after a few seconds, begins the standard display for the locked mode as
described above.
Menu Map
Level 1 Level 2 Level 3 Level 4 Option/Setting Description/Notes
DMX ADDRESS
MENU
SET DMX START CHANNEL: ### 1-483
Selected value becomes the first
DMX value in the range for that
fixture on a DMX 512 link.
SET MENU
FACTORY DEFAULT
SETTINGS: ###
ON Reverts fixture to default setting
OFF
Indicates a factory default has
changed
PAN/TILT SWAP:
DISABLED
Restores default Pan and Tilt
Motion
ENABLED Swaps the Pan and Tilt Motion
PAN INVERT:
DISABLED
Restores default Pan motor
direction
ENABLED Inverts Pan motor direction
TILT INVERT:
DISABLED
Restores default Tilt motor
direction
ENABLED Inverts Tilt motor direction
DISPLAY LEVEL:
OFF Dims Display when menu is locked
ON Turns display on
DATA LOSS TIMEOUT:
SHORT
Fixture blacks out 1 second after
data loss
LONG
Fixture blacks out when fixture
shuts down
FIXTURE
MODE MENU
CROSSLOAD
FIRMWARE:
NO Safe setting
YES
Uploads fixture software to all
other SHOWPIX fixtures on the link
PROTOCOL MODE
STANDARD
Assigns the protocol type for DMX
control
ENHANCED
PIXEL MAP
REDUCED