Operating instructions

102
Technical Notes
Display SolutionProblem
COMMUNICATIONS
ERROR
TRANSFER
ERROR
44,
19
Check that the camera is
properly connected and
battery fully charged.
Error occurred when
pictures were trans-
ferred to computer.
FILE CONTAINS
NO IMAGE DATA
86,
72
Delete file or reformat
memory card.
File created by com-
puter or different
make of camera.
NO IMAGES ARE
MARKED FOR
TRANSFER
33,
44,
79,
91
Disconnect camera and
mark at least one picture
for transfer before con-
necting camera again.
No pictures marked
for transfer when
(
) button
pressed to copy pic-
tures to computer.
SYSTEM ERROR
16
Turn camera off, unplug
optional AC adapter kit (if
using) or remove and re-in-
sert battery, and turn cam-
era on. If error persists,
contact retailer or Nikon
representative.
Error has occurred in
camera’s internal cir-
cuitry.
16,
44,
47
If error appears in comput-
er monitor, click OK to exit
Nikon View 5. Turn cam-
era off, reconnect cable or
replace memory card, then
turn camera on.
USB cable discon-
nected or memory
card removed while
pictures are being
transferred to com-
puter.
74
Turn camera off and dis-
connect USB cable, then
change USB selection in
camera setup menu and
reconnect camera. If error
reoccurs, use Nikon View
5
button to transfer
pictures.
Protocol selected in
USB menu does not
match that used by
computer operating
system, causing error
when (
) but-
ton is pressed to
transfer pictures.